Fm Radio; Radio Tuning; Automatic Radio Tuning; Troubleshooting - SCHUBERTH SRC SYSTEM PRO Guía De Usario

Ocultar thumbs Ver también para SRC SYSTEM PRO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8. FM RADIO

Your SRC-System™ PRO includes a built-in FM radio with a 6 Preset
memory and RDS (Radio Data System).
RDS allows the radio to automatically retune to the strongest
frequency available for the FM station you are listening to when the
signal becomes too weak.
ß
Turn on Radio
In standby, double-tap
ß
µ
Turn off Radio
Press
for 2 seconds
ß
Next Station
With radio ON, tap
ß
Previous Station
With radio ON, double-tap
RDS ON/OFF
With Radio ON, press
(Default: Off)

8.1 RADIO TUNING

Preset stations can be saved via the Cardo Community, the Cardo Smartset App or
directly on your unit.
1. Turn on the Radio.
2. Select a Preset number you wish to set (Preset 1 – 6) by tapping
preset is heard.
3. Find an FM station to save using Seek or Scan.
Choose a preset by tapping
Seek up/down and Save
+
-
Press
or
(Find the next FM station)
µ
Tap
within 20 seconds to save to current preset
With Radio ON, press
Scan and Save:
To stop search, tap
(Automatically scans up for
µ
Tap
within 20 seconds to save to current preset
a station)
To continue scan, wait for the next station to be found.
µ
µ
µ
+
-
and
simultaneously for 2 seconds
µ
until the desired
µ
for 2 seconds
+
for 5 seconds
+

8.2 AUTOMATIC RADIO TUNING

This feature makes finding new stations fast and easy by automatically creating a
temporary list of 6 radio stations.
1. With the radio on, press
-
for 5 seconds.
2. The radio will search upwards (higher frequency) from the current station and
store the next 6 FM stations it discovers.
3. If desired, repeat to store the next 6 FM stations.
These 6 temporary stations cannot be saved and do not replace the FM Presets you may
have saved.
Turning off the unit will clear the temporary stations and restore the FM Presets.

9. TROUBLESHOOTING

If your SRC-System™ PRO stops responding, reset it by turning it off
Reboot
and then on again (press
Reset Pairing
+
1. In Standby, press
(Deletes all
µ
2. Press
for 2 seconds until LED flashes 5 times in PURPLE.
paired devices)
s
for 2 seconds).
for 5 secs until LED flashes RED/BLUE.
|
SRCS Pro
19

Publicidad

Tabla de contenido
loading

Tabla de contenido