Intended Use; Contents; Technical Data - VOSS.farming FM10 Instrucciones De Operación

NOTICE
► Danger of overvoltage. Disconnect the device from the mains socket during
thunderstorms.
► Should you notice any device defects, smells or smoke emissions, significant
malfunctions and/or damage to the housing, switch off the device and contact
the Service centre.
4

INTENDED USE

The VOSS.farming FM10 Fence Manager is used for centralised remote control
and monitoring of up to six independent RF electric fence energisers and/or
VOSS.farming FS10 Fence Sensors within the transmission range of the antenna. This
device can be used to determine information about the function of all connected
devices. Any other use is prohibited. The exclusive purpose of the device is to provide
additional monitoring and safety for your electric fence system. The device does not
release the fence operator from the obligation to check the electric fence regularly for
faults. The device is intended for private and commercial use.
5

CONTENTS

The device includes the following:
ऀ 1x VOSS.farming FM10 Fence Manager
ऀ 1x base antenna
ऀ 1 x mains adapter
ऀ 1 x wall-mounting kit
ऀ 1 x instruction manual
3

TECHNICAL DATA

ऀ Base antenna range:
ऀ Range with external antenna:
ऀ RF transmission frequency:
ऀ Power supply:
Input:
ƒ
Output:
ƒ
Backup battery (fail-safe):
ƒ
ऀ Maximum power consumption: 300 mA
ऀ Protection class:
Dimensions and weight
Dimensions incl. antenna:
Dimensions without antenna:
Weight incl. antenna:
32
INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM10
Up to 10 km
(connection to an external antenna is possible
using an extension cable (2 m or 10 m))
Up to 30 km
869.525 Mhz/22 dBM
100–240 VAC, 50/60 Hz, max. 0.6 A
14.0 VDC, 1000 mA
9.6 V, 800 mAh, NimH
IP20
157 mm x 340 mm x 34 mm
157 mm x 126 mm x 34 mm
450.9 g
41650 | 12 | 2020 | V2