Pairing The Fence Sensor - VOSS.farming FM10 Instrucciones De Operación

INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM10
9.2

PAIRING THE FENCE SENSOR

The process of connecting two devices is referred to as
pairing. The Fence Manager can be paired with up to six
different devices. Each device has its own name.
Info
A new pairing cannot be created if all positions are
occupied.
1. Press and hold the Menu button in the overview window
or the detail window for more than one second to open
the menu.
2. Select the
Pairing
buttons and confirm the selection by briefly pressing
the Enter button.
3. Switch the electric fence energiser to Pairing mode.
To do so, switch off the Fence Sensor with the
ƒ
magnet.
The LED on the Fence Sensor flashes alternately
ƒ
green and red.
4. Place the Fence Sensor in close proximity to the Fence
Manager.
5. Select an empty line (
using the arrow buttons (Fig. 5).
6. Briefly press the Enter button to confirm the selection.
The Fence Sensor will be paired with the Fence Manager and
the display shows
Pairing new device
Following successful pairing, a window appears in which a
letter can be assigned to the Fence Sensor and, if desired, the
Fence Sensor can be assigned to an electric fence energiser
(Figure. 7).
Info
The house icon signifies that the device has not been
subordinated to an electric fence energiser. For
information on subordinating devices, see Section
9.3.
7. Briefly press the Enter button and use the arrow buttons
to assign a number.
8. Confirm your input by briefly pressing the Enter button.
The Fence Sensor is now paired with the Fence Manager and
displayed in the list (Fig. 8).
9. Press the Exit button to return to the previous menu.
41650 | 12 | 2020 | V2
menu item using the arrow
----- empty -----
) in the list
(Fig. 6).
EN
FR
NL
Fig. 5
SV
Fig. 6
Fig. 7
Fig. 8
43
DE
EN
IT
ES
PL