Operation; Pairing The Electric Fence Energiser - VOSS.farming FM10 Instrucciones De Operación

9

OPERATION

9.1

PAIRING THE ELECTRIC FENCE ENERGISER

The process of connecting two devices is referred to as pairing. The Fence Manager can
be paired with up to six different devices. Each device has its own name.
Info
A new pairing cannot be created if all positions are occupied.
1. Press and hold the Menu button in the overview window
or the detail window for more than one second to open
the menu.
2. Select the
Pairing
buttons and confirm the selection by briefly pressing
the Enter button.
3. Switch the electric fence energiser to Pairing mode.
To do so, switch the electric fence energiser on and
ƒ
off again.
Then press and hold the On/Off button for more
ƒ
than five seconds until the LED on the electric fence
energiser starts flashing.
4. Place the electric fence energiser in close proximity to
the Fence Manager.
5. Select an empty line (
using the arrow buttons (Fig. 1).
6. Briefly press the Enter button to confirm the selection.
The electric fence energiser will be paired with the Fence
Manager and the display shows
(Fig. 2).
Following successful
a window appears in which a
number can be assigned to the
electric fence energiser (Fig. 3).
7. Briefly press the Enter button
and use the arrow buttons to
assign a number.
8. Confirm your input by briefly
pressing the Enter button.
The electric fence energiser is now
paired with the Fence Manager
and displayed in the list (Fig. 4).
9. Briefly press the Exit button to return to the previous menu.
42
INSTRUCTION MANUAL VOSS.FARMING FENCE MANAGER FM10
menu item using the arrow
----- empty -----
Pairing new device
pairing,
) in the list
Fig. 3
Fig. 1
Fig. 2
Fig. 4
41650 | 12 | 2020 | V2