Kichler Monarch II Select Manual De Instrucciones página 12

11
12. INSTALLING THE LAMP & GLASS
SHADE
Step 1. Install 3, 4 Watt, E-12 LED lamps
(included).
Step 2. Remove the decorative nut, glass cap
and metal nut from the light fixture stem.
Place the glass shade over the light fixture
stem and secure the shade with a metal nut
(rubber side touching the shade). (Fig. 20)
Lamps
Step 3. Fit the decorative glass cap onto the
light fixture stem, while holding the decorative
Light kit assembly
glass cap, thread the decorative nut onto the
light fixture stem securely. DO NOT OVER
TIGHTEN.
Note: Make sure to leave enough space
between the fan pull chain and the fluorescent
lamp so the chain doesn't rub against any of
Glass shade
the lamp.
Metal nut
Decorative glass cap
Decorative nut
Fig. 20