Kichler Monarch II Select Manual De Instrucciones página 6

5
Step 8. Slip the coupling cover, canopy cover
and canopy onto the downrod.
Hanger ball
Downrod
Thread the hanger ball onto the downrod,
insert the cross pin through the downrod and
Canopy
tighten. Now tighten the set screw. (Fig. 9)
Step 9. Lift the motor assembly into position
Canopy cover
and place the hanger ball into the ceiling
mounting bracket.
Coupling cover
Set screws
Rotate the entire assembly until the "Check
Retaining clip
Hitch pin
Tab" has dropped into the "Registration Slot"
and seats firmly. (Fig. 10)
The entire motor assembly should not rotate
(left or right) when seated properly.
WARNING: Failure to reattach the cross pin
and seat the "Check Tab" can cause the fan
to fall from the ceiling during operation. Take
special care to make sure this pin is
reattached.
Fig. 9
Registration slot
Check tab
Fig. 10