HARDWARE CONTENTS
HARDWARE BAG
Hanging bracket Screw
Hanging bracket Washer +
Tooth Washer
Lag Screw
Flat Washer and Spring Washer
Hex Nut and Flat Washer
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING:
•
Important: When using an existing outlet box, be sure the box is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury or
death.
•
Turn off circuit breakers and wall switch to the fan supply wire leads. Warning: Failure to
disconnect power supply prior to installation may result in serious injury or death.
•
Warning - Connecting this fan to a light switch (on/off) has been known to cause damage to the
receiver. This fan must be wired to continually receive power. Failure to do so will drastically
reduce the lifespan of this fan.
•
WARNING – To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To Outlet Box
Marked 'Acceptable for Fan Support of 15.9 kg (35 lbs) or less' And Use Mounting Screws
Provided With The Outlet Box and/or Support Directly From Building Structure. Most Outlet Boxes
Commonly Used For The Support of Luminaires Are Not Acceptable For Fan Support And May
Need To Be Replaced. Consult A Qualified Electrician If In Doubt."
•
Important: Be sure wiring box is properly grounded or that a ground (green) wire is present.
•
Make sure the installation site you choose allows a minimum of 7 feet from the floor to the end of
the blades.
Wire Connector
Fan Blade Screws and Washers
Balance Kit
3
REMOTE CONTROL
Remote Control
Remote Cradle
Remote Cradle Screw
Battery