Hanging The Fan - LUCCI Air AIRFUSION MOTO Manual Del Usuario

AIRFUSION MOTO Installation Instructions
INSTALLATION OF BLADE (Fig. 4)
1. Before Installing the blades, remove the blade screws from the top of the fan motor assembly.
2. Align the 2 holes on the blade with the 2 holes on the rotating member of the fan motor assembly.
3. Use the 2 blade screws from step 1, to secure the blade onto the fan motor assembly.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care not to
over tighten the screws, as this can damage the blades.
4. Repeat the same process for the other blades.
INSTALLATION OF BOTTOM COVER (Fig. 5)
•
Install the bottom cover to the fan assembly then secure it by turning clockwise.
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig. 6)
6 | P a g e

HANGING THE FAN

Fig. 6
Fig.4
Fig. 5