Moving Your Appliance - Infiniton CL-189XY Manual De Usuario

Control panel and display
Setting the Fridge Compartment Temperature
The fridge compartment temperature can be set between 2°C and 8°C.
Repeatedly press +/– to set the desired temperature.
Fast cooling
This mode allows you to cool food quickly and keep food fresh for a longer period.
Press to enter this mode and the display will show FC. The fridge compartment display will be 1°C.
This mode will be automatically deactivated after 3 hours of operation.
Lock/Unlock
This function allows you to disable the buttons.
To activate this function, press and hold

illuminate.
 To deactivate this function, press and hold
IMPORTANT! In the unlock state, if there is no operation of any button for a while, the system will
automatically enter the lock state.

MOVING YOUR APPLIANCE

If the appliance is turned off for any reason, wait for 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalise
before restarting.
 Turn off the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile parts (shelves, accessories, etc.) or fix them into the
appliance to avoid any shock.
 Relocate and install. If the appliance has been left on its side for any length of time, leave it standing upright for at least 10 minutes before turning on.
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally friendly and natural gas, it is explosive. Therefore you
should be careful during shipment and installation to prevent your appliance's cooler elements from being damaged. In the event of a leak caused by
damage to the cooler elements, move your appliance from open flame or heat sources and ventilate the room where the appliance is located for a few
minutes.
Fridge compartment temperature display
Temperature control buttons
Fast cooling button
Lock/unlock button
for about 3 seconds. You will hear a beep.
again for 3 seconds. You will hear a beep.
EN-5