Infiniton CL-189XY Manual De Usuario página 41


Unscrew feet and then unscrew nut

Remove the hinge shaft

hole and insert it into the left hole. Tighten
5
the nut and then tighten the feet.
As indicated, move the lower hinge shaft from
6
the right hinge hole to the left hinge hole.
Reinstall the lower left hinge and feet at the
7
bottom of the cabinet.
Remove the stopper on the door cover, place
8
the stopper to the left side of the door and
secure.
Place the door on the lower hinge, making sure
to insert the hinge pin into the hole at the
9
bottom of the door, then place the supplied
upper left hinge on the door and fix the screws.
Open the door cover hole plug, remove the
wiring harness terminal of the door, and
10
connect with the wires in the cabinet one by
one, then cover the hole plug.
Install the supplied upper left hinge cover onto
the cabinet after installing the cylindrical door
11
switch and tighten the
screw.
Install the upper hinged hole plug to the right
12
side of the box and tighten all screws.

.
from the right
EN-12