Kit Assembly; Din Radio Provision With Pocket - Metra 99-5823CH Instrucciones De Instalación

DIN radio provision with pocket

1. Remove the metal "DIN" sleeve
from the aftermarket radio.
2. Slide the sleeve into the upper
opening of the Radio Housing
and secure by bending the
metal locking tabs down.
(Figure A)
3. Snap the pocket into the lower
opening of the radio housing.
(Figure B)
4. Slide the radio back into the
sleeve until it clicks in. (Figure B)
5. Connect the climate extension
harness to the climate control
harness removed in step 2 of
disassembly, and then into the
99-5823CH radio/climate panel.
99-5823CH

Kit Assembly

6. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapters from Metra and AXXESS to integrate
your new radio. Re-connect the negative
battery terminal and test the radio for proper
operation.
7. Reassemble the dash in reverse order of
disassembly using the 99-5823CH radio/
climate panel instead of the factory radio trim
panel.
(Figure A)
®
(Figure B)
3