Winix Smart (Wi-Fi) - Winix Tower Q Manual Del Usuario

WINIX SMART
6. Winix Smart
WINIX SMART allows you to conveniently control your air purifier from
any location.
WINIX SMART is optimized for the following specifications. Depending
on your smart phone capabilities and service parameters, some
functions may not be supported.
ANDROID
iOS
Before connecting to Smart Home
• A Wi-Fi wireless router must be installed within range of the air purifier to use WINIX SMART.
• Ensure Wi-Fi router matches the following specifications; 802.11b/g/n 2.4GHZ or for a dual-band wireless
router (2.4GHz/5GHz), be sure to select 2.4GHz.
• Be sure to have the Wi-Fi password handy.
• During registration, please keep the air purifier, wireless router, and smart device within a 32 ft. radius.
• Obstacles between the air purifier, wireless router, and smart device may cause weak reception.
• Before connecting, users with a "Smart Network Switch" on their device should temporarily disable it.
• Once WINIX SMART has been connected, the "Smart Network Switch" on your device can be enabled.
■ Setup
Download the WINIX SMART app on your device.
①
x available via Google Play store or iTunes App store
Run the app and follow the setup
②
guide to connect your device to the unit.
x Select "New Unit" and choose NK305
to connect to this model.
x Read the notice and select "OK".
x Enter the password to your Wi-Fi network.
x Press and hold the Wi-Fi button on the unit's control
panel until it beeps. *The Wi-Fi strength indicator will begin to blink*
x Connect to the WINIX SMART network via your device's network menu.
x Selecting "Next" will connect your unit to your device.
x Define the unit settings (Name and Location).
x When set up is complete, the WINIX SMART Indicator will light up.
English
(ICS 4.12 Jellybean or later recommended)
(6.0 or later recommended - iPhone 4S or later)
NK305 15