Sound And Visual Signals; Operation - BETTY CROCKER BCF1690 Manual De Instrucciones

Sound and Visual Signals

Beeping
You will hear beep signals
ž
When you press the control panel keys
ž
During the second kneading cycle of the BASIC, FRENCH, SWEET,
BREADMIX, and CAKE programs to signal that fruits, nuts and other
ingredients can be added
ž
At the end of the program.
During the Cool Down cycle at the end of the baking procedure, the beep signal will
sound periodically to remind you that the finished loaf is ready to be removed from
the bread pan.
H:HH Message on Display
If the temperature of the bread machine is too high (over 104°F) to start a new
program after a previous use, H:HH will appear on the display when you attempt to
start the new program, an a beep signal will also be heard. If this happens, continue
to press the START/STOP key until the H:HH message is deleted and the basic
setting ( 3:00) appears on the display. Remove the bread pan and wait until the
1
appliance has cooled down.
Before operating your bread machine for the first time, be certain to clean it
thoroughly, as described on page 10.
To bake a loaf of bread using one of the standard programs, follow these
instructions:
1. Open the baking compartment cover. Remove the bread pan by grasping it on
both sides and turning it counter-clockwise slightly until it releases, then pull up.
2. Check that the drive shaft at the bottom of the
bread pan is clean, then place the kneading
paddle onto the shaft as shown. Be sure the
paddle slides all the way down. (If it is not
positioned securely, the ingredients will not be
mixed or kneaded properly.)

Operation

7