Hazet-Werk 4902/6 Manual De Instrucciones página 11

• Any personal injury or material losses caused
by improper use are the sole responsibility of
the operator and user.
4. Storage
The device has to be stored according
to the following conditions:
• The device must not be stored outdoors.
• Store the device in a dry and dust-free place.
• Do not expose the device to liquids or other
aggressive substances.
• Storage temperature: -10 up to +45°C
• Relative air humidity: max. 60%
2 For Your Safety
5. Dangers emanating from
the device
1. Before each use, check the Inside Spring
Vice for full operatability. Do not use the
Inside Spring Vice if the operatability can-
not be ensured or if damage is detected.
If the Inside Spring Vice is used, although
its full operatability cannot be ensured, you
risk severe injuries to persons and damage
to property.
Full operatability is given when:
– the appliance is smooth running
(spindle 1 must be greased before
each use);
the spindle's location head is absolutely
–
damage-free;
– the headless set screw 1
the end of the spindle (limit stop);
–
the bearing of the driving nut 2 is
smooth-running;
– the tensioning jaws 4 and 5 are
absolutely damage-free.
2. When tensioning the spring, it is important
that the spring windings do not come into
contact with each other because the spind-
le may get overloaded and may break.
3. Only use appropriate tensioning jaws (see
"Application" on page 13).
4. The spring (illustration 4, page 14) must
rest securely outside of the inner rib.
Please make sure that the spring cannot
slide out of the tensioning jaws.
5. The tensioning jaws have to be used
and changed in combination only and as
intended for their use.
6. For safety reasons, modifications of the
Inside Spring Vice are strictly forbidden.
Any modification of the Inside Spring Vice
will lead to the exclusion of liability.
is inserted at
a
11