For Your Information; General Information - Hazet-Werk 4902/6 Manual De Instrucciones

1. General information

• Please take care that the user of this tool care-
fully reads through these operating instruc-
tions and understands all information given in
there before the first use.
• These operating instructions contain impor-
tant advices that are necessary for a safe and
trouble-free operation of your HAZET Inside
Spring Vice.
• For effective use of the Inside Spring Vice as
intended, it is essential that all safety instruc-
tions and other information in these operating
instructions is adhered to.
• For this reason, always keep these operating
and safety instructions together with your
HAZET Inside Spring Vice.
• This tool has been designed exclusively for
particular applications. HAZET emphasizes
that any modification of this tool and/or an
application that does not correspond to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to per-
sons or damages to property that are due to
an improper application or misuse of this tool
respectively due to the disregard of the safety
instructions.
• Furthermore, the general safety regulations,
regulations for the prevention of accidents
and regulations for environmental protection
being valid for the application area of this
device have to be observed and respected,
too.
2. Explanation of symbols
ATTENTION: Please pay attention to these
symbols!
READ THE OPERATING INSTRUCTIONS!
The operator is obliged to observe
the operating instructions and has to
instruct all users of the HAZET
Inside Spring Vice according to the
information given in this manual.

For your information

1
NOTICE!
3. Liability and warranty
• Any deviation from the intended use
and/or any misapplication of the device are not
allowed and will be considered as improper use.
• Any claims against the fabricant and/or its
authorized agents because of damage caused
by improper use of the device are excluded.
• Any personal injury or any material losses caused
by improper use are the sole responsibility of the
operator and user.
4. Spare Parts
• Only use original spare parts of the
manufacturer.
• Unsuitable or defective spare parts
may cause damage, malfunction or the
device's total failure.
• When using spare parts that are not approved,
all warranty claims, service claims, claims for
compensation and liability claims against the
manufacturer or its agents, distributors and
sales representatives will be void.
5. Disposal
• For disposal, clean device and disas-
semble according to the regulations for
environmental protection and work safety.
Components can be used for recycling.
• Send metal residuals to be scrapped.
This symbol marks indications which
help to you to use the device.
WARNING!
This symbol indicates important speci-
fications, dangerous conditions, safety
risks and safety advice.
CAUTION!
This symbol marks advice which if dis-
regarded results in damage, malfunction
and/or functional failure of the tool.
9