Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Align hood deflector with the raised area on the center
of hood. Press firmly to adhere exposed tape.
hood shield
tape
3
Fender protector Installation
5

Care and Cleaning

•
Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Repeat Steps 1 - 4 for both fender protectors. Position bump-ons as
9.5"
24cm
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
With hood shield in its final position, remove re-
mainder of tape by pulling on free ends.
4
indicated to prevent vibration.
bump-on
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2