Christie LX1750 Manual De Instrucciones página 14

3. Select "Network setting" in the Network menu and press SELECT, and then the LAN
setting screen will appear and selected LAN settings will be displayed. Adjust each
item to the setting environment. Consult your system administrator about the detailed
settings.
Press SELECT in a row where you want to adjust, and adjust the figures with Point as
and move among the items with Point qw, and then press SELECT to fix. Move to the
next row with Point as to adjust.
4. After completing all the settings, select "Set" and press SELECT. Now, all procedures
have been done. To cancel the adjusted settings, select "Cancel" and press SELECT.
You can confirm the LAN settings you have made from "Network information" (p.14). In
such cases that the LAN cannot be connected, see this screen.
DHCP: On
Item Description
DHCP . ................... S ets DHCP function On or Off. When you setup the network setting manually, select
"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set
according to your network environment *
IP address .............Sets IP address of the projector.
Subnet ....................Sets Subnet mask. Normally sets 255.255.255.0.
Gateway*
.............Sets IP address of the default gateway (Router).
2
DNS* ....................... Sets IP address of the DNS server.
3
*1 Set "On" only when the DHCP server is available on your network environment.
*2 Set [255.255.255.255] if the network does not provide the gateway (router).
*3 Set [255.255.255.255] if you do not use the function E-mail alert.
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
Network setting
DHCP: Off
* The numerical value is a setting example.
.
1
Network configuration
13