Network Pin Code; Network Information - Christie LX1750 Manual De Instrucciones

Chapter 2 Setup Procedures

Network PIN code

The Network PIN code is to restrict the access to the projector through the network.
After setting the Network PIN code, you need to enter it to operate the projector via the
networks.
1. Select "Network PIN code" in the Network menu, and press SELECT.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with Point as and move to the next items with Point q w. Select "Set"
and press SELECT to set. To cancel the preset Network PIN code, select "Cancel". When
you do not want to set the Network PIN code, set "0000".
It is recommended to set the Network PIN code if you use the projector via the networks.
The Network PIN code can be set also through the networks. See "3. Basic setting and
operation" ➔ "Initial setting" ➔ "Network PIN code setting" (p.23).
* You can also enter the Network PIN code with the number buttons on the remote control.
Network PIN code
Network PIN code screen

Network information

Select "Network information" in the Network menu and press Point w or SELECT to show
LAN setting environment of the currently selected projector. (The description below is an
example and different from what will be shown.)
* The numerical value is a setting example.
14
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)