Use Of Telnet - Christie LX1750 Manual De Instrucciones

Chapter 5 Appendix

Use of telnet

You can control the projector by using the telnet application
Normally, the telnet application is available on your computer.
* The telnet 10000 port is used to control the projector.
Control
(For example, in case of using the telnet
application of Windows 7.)
1. Click Start-->Control Panel--> Programs
-->Turn Windows features on or off,
and select Telnet Client in the Windows
Features list, and then click OK.
Click Start, and type "telnet" in the text
box, and then press "Enter" key.
2. The telnet application will start and the following window will be displayed. Type the fol-
lowing to connect the projector.
> open 192.168.1.201 10000 [return]
* Use the IP address assigned to the projector.
50
installed on your computer.
*1
(For example, in case of using the telnet
application of Mac OS X v 10.6)
1. Select Terminal from Applications
-->Utilities.
Type the following on the displayed win-
dow.
> telnet [return]
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)