Chapter 5 Appendix
Operation
Q
Why can't I change the controls in the setting page with a web browser?
A
Please make sure the projector is turned on. If it is in the standby mode, the setting
is not effective on the projector. To control the projector with a web browser, the
projector must be in the powered-on condition.
Q
Why does it sometimes take a lot of time to complete the page display?
A
The display speed of the page depends on the network environment in which both
the projector and computer are placed. It may take time to complete the page dis-
play if network traffic is heavy. Please consult your network administrator.
Q
How many numbers of the E-mail address can I register in the E-mail set-
ting page.
A
You can register up to 10 addresses.
Q
Why am I not receiving E-mail alert messages?
A
Make sure that the registered E-mail address and SMTP server address are correct. If
the SMTP server is located in your LAN (Local Area Network), the address should be
set to the SMTP server in your LAN. The SMTP server located outside of your LAN
may not be available for security reason. For further information please contact your
network administrator (+ p.25).
58
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)