Declaration Of Conformity - Iqua Essence BHS-316 Guia Del Usuario

Refer to Fig 1 and Fig 2
Overview of the product
. Multifunction button Power on/off, answer/end call
2. Indicator light Status indication with green and red light
3. Charging connector Micro USB connector
4. Earpiece
5. Volume+ button Increase the volume
6. Volume- button Decrease the volume
7. Microphone
Sales package contents
a. Headset
b. 2 earplugs (one on headset)
c. Earhook
d. Neck Strap (in selected markets)
e. Wall Charger
f. Quick Guide
Getting started
Charging the battery
Before using BHS-316 for the first time, you must charge it for approximately 2 hours.
When the battery is fully charged, it provides up to 6 hours of talk time and up to 150
hours of standby time.
Always use the charger provided in the sales package.
1. Connect the charger cable to Iqua BHS-316.
2. Plug the charger into a wall socket. The red LED will turn on and continue flashing.
3. When the battery is fully charged, the red LED will turn off and green LED turns on.
Switching on and off
Switching on Iqua BHS-316
When the headset is powered off, press and hold the Multifunction -button until the green
light flashes.
Switching off Iqua BHS-316
When the headset is powered on, press and hold the Multifunction -button until the red
light flashes once and then turns off.
Pairing Iqua BHS-316 to your mobile phone
Pairing is the process of linking Iqua BHS-316 with your compatible Bluetooth mobile
phone. After this process is completed, you can use Iqua BHS-316 with the paired mobile
phone. If you want to use Iqua BHS-316 with another mobile phone, you must repeat the
pairing process again. Even though Iqua BHS-316 can be paired with up to 8 compatible
phones it can only be connected to one phone at a time. Once it is paired with 8 phones,
the 9th paired device will replace the st paired device.
For latest compatibility information please visit www.iqua.com.
Pairing process
1. Power on the headset, press and hold both Volume + and Volume - buttons until the
green and red lights start flashing alternately.
2. Release the button. Iqua BHS-316 is now in pairing mode.
3. Check your phone user guide for details on how to search and pair.
4. When phone has found the headset, it will show Iqua Essence on its screen.
5. In order to pair with the phone, enter the PIN code 0000.
6. After pairing, Iqua BHS-316 automatically connects with your mobile phone. Once
pairing and connection are succeeded, green light flashes twice every 8 seconds. The
headset is now ready to make and receive calls.
Disconnecting Iqua BHS-316 and your phone
Easiest way to disconnect BHS-316 and your phone is simply switch off the BHS-316.
Reconnecting the paired Iqua BHS-316 to a compatible phone
To reconnect Iqua BHS-316 to the last phone used, simply switch on the headset and it
will automatically connect to the phone.
There are occasions when headset is temporarily out of Bluetooth operating range (up
to0 meters, e.g. user wearing the headset walks away from the phone), the headset
will be disconnected from the phone and user will hear a warning tone from the headset.
Headset is now in "powered on but no Bluetooth connection" –mode (Green light flashes
once every 5 seconds). If the headset is back in range within 10 minutes, BHS-316
auto-reconnects with the last phone. If the headset is out of range for over 10 minutes,
long press both Multifunction and Volume + buttons or both Multifunction and Volume –
buttons to reactivate the connection.
Call Functions
Answer a call
Press the Multifunction -button briefly to answer an incoming call.
End a call
To end an active call, press briefly the Multifunction -button. You will hear a tone when
the call is ended.
Reject a call
When you receive an incoming call that you do not want to answer, double press the
Multifunction-button to reject.
Redial the last dialed number
Press and hold the Volume+ button until you hear a tone. With some phone models,
press the Volume + button again to dial the number displayed on the phone.
Voice dialing (when supported by the phone)
Press and hold the Volume – button until you hear a tone (Voice Dial feature activated on
the phone), speak the voice tag. Refer to the user guide of your phone for details. Some
phone models do not support voice dialing.
Adjusting volume
Press the Volume + button to increase the volume. Press Volume – button to decrease
volume.
Mute & un-mute
During an on-going call, press and hold both Multifunction and Volume + buttons until
you hear a tone.
Product specifications
Model Iqua BHS-316
Size 58mm x 7.2mm x 0.7mm
Weight 0g
Talk time 6Hours
Standby time 50Hours
Charging time Within 2h
Battery type Internal rechargeable battery
Bluetooth Standard Bluetooth 2.0 EDR Class II
Supported Bluetooth profiles Headset1.1 and Handsfree 1.5
Connection Point-to-point
Paired devices Up to 8, one at a time
Operating Distance 0 meters
Operating temperature range 0°C to 55°C
Storage temperature range -20°C to 55°C
Switch between phone & headset
To transfer call from Iqua BHS-316 to your phone or vice versa, press and hold both
Multifunction and Volume – buttons. You will hear a tone when the transfer is successful.
Erase paired devices
Iqua BHS-316 can be paired to up to 8 devices. Once it is already paired to 8 devices,
the 9th paired device will replace the st paired device. You can also erase the paired
device list of the headset in order to pair it with new devices. While the headset is
powered on but not connected with any Bluetooth device, press and hold the Volume +
button for 5 seconds until you hear a tone.
Light indication summary
The BHS-316's LED lights can be green or red and are usually accompanied by a sound
signal.
Power on
Power off
Powered on but no Bluetooth connection Green LED flashes once every 5 seconds
Connection active
Pairing mode
Battery low
Battery charging
Power management
This product is powered by a built-in rechargeable battery which can not be changed.
Do not attempt to replace the battery. Rechargeable battery can be charged and
discharged hundreds of times, but it will eventually wear out. After a period of time
that will vary depending on the use and usage conditions you may find that the built-in
battery will power your product for only a couple of hours requiring you to charge more
frequently. Do charge your device only with the charger provided in the sales package.
Unplug the charger when not in use. Do not leave the device connected to the charger
for longer period than needed, since overcharging may shorten the battery lifetime. If
left unused, a fully charged battery will discharge itself over time. Temperature extremes
may affect the ability of the battery to charge. Always try to keep the device between
5 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold places such as in
closed car in summer or winter conditions will reduce the capacity and lifetime of the
battery. A device with hot or cold battery may not work for a while even when the battery
is fully charged. Battery performance is particularly limited in temperatures well below
freezing. Do not charge in humid environment.
Care and Maintenance
– Do not expose the device to liquid, moisture or humidity as it is not
waterproof.
– Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
– Do not store the device in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
– Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
– Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
– Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the device.
– Use a soft, clean, dry cloth to clean any lenses.
– Do not expose your device to contact with sharp objects as this will cause
scratches and damage.
– Do not stick anything inside the device as this may damage internal
components.
– Do not dismantle the device or the charger as they do not contain
serviceable parts and taking apart the device may expose you to dangerous
voltages or other hazards
– Act according to your local rules and do not dispose of this product as part
of your normal household waste. Follow the applicable separate collection
system for electrical and electronic products.
How to get service for my IQUA Product?
If you believe that you are entitled to a repair or replacement of your IQUA product
based on your statutory rights under the applicable national laws relating to the sale of
consumer products or warranty given by the retailer who has sold the IQUA Product to
you, please contact your retailer.

DECLARATION OF CONFORMITY

We, Iqua Ltd., declare under our sole responsibility, that the product, BHS-316,
conforms with the provisions of the following Council Directive: 999/5/EC. A copy of the
Declaration of Conformity can be found at http://www.iqua.com/declaration_of_conformity
Copyright © 2008 Iqua Ltd
3
Green LED flashes once
Red LED flashes once and then turns off
Green LED flashes twice every 8 seconds
Green and red LED flashes alternately
Battery low tone is played, red LED flashes.
Red LED flashes continuously
EN