Declaration Of Conformity - Iqua BHS-333 Manual Del Usuario

Refer to Fig 1 and Fig 2
Overview of the product
. Multifunction button Handling call functions
2. Indicator Light Status indication with green light
3. Charging connector
4. Earpiece
5. Microphone
Sales package contents
a. Headset
b. Wall charger
c. User guide
d. Two earplugs (one on headset )
e. Earhook (available in selected markets)
General Information
Thank you for purchasing Iqua BHS-333 Wireless Bluetooth® Headset. Your new device
is a stylish product that enables you to communicate comfortably with compatible mobile
phones that support Bluetooth wireless technology.
Getting Started
Charging the battery
Before using BHS-333, you must charge it for approximately 2 hours. When the battery
is fully charged, it provides up to 6 hours of talk time and up to 50 hours of standby
time.
Always use the charger provided in the sales package.
. Connect the charger cable to BHS-333.
2. Plug the charger into a wall socket. The green light will turn on.
3. When the battery is fully charged, the green light will turn off.
Switching on and off
To switch on BHS-333
When the headset is powered off, press the Multifunction -button until you can hear a
sound and the green light fl ashes.
To switch off BHS-333
When the headset is powered on, press and hold the Multifunction -button until you can
hear ascending sound and the green light fl ashes once and turns off.
Pairing the Bluetooth headset to a Bluetooth mobile phone
Pairing is the process for linking BHS-333 with your Bluetooth enabled mobile phone.*
After this process is completed, you can use the BHS-333 with the paired mobile phone.
If you want to use the bhs-333 with another mobile phone, you must repeat the pairing
process. Even though BHS-333 can be paired with up to 8 compatible phones it can only
be connected to one phone at a time. Once it is paired with 8 phones, the 9th paired
device will replace the st paired device.
. When the headset is powered off, press and hold the Multifunction -button until you
can hear two high sounds and the green light starts fl ashing rapidly.
2. Release the button. BHS-333 is now in pairing mode, waiting for your mobile phone to
contact it.
3. Complete the pairing with your mobile phone. Please refer your mobile phone manual
for details on how to search and pair. When phone has found the headset, it will show
Iqua BHS-333 on its screen. In order to pair with the phone, enter the PIN code 0000.
4. After pairing, BHS-333 will automatically connect to your mobile phone. After pairing,
some phones do not automatically connect to the headset. If this is the case, please
ensure that you connect the phone to the headset (please refer to your mobile phone
manual). Once pairing and connection are completed, the green light fl ashes twice
every 5 seconds.
If the headset is turned on within 0 meters from several paired phones, the headset will
try to connect to the last connected phone within 0 seconds. If the headset does not
connect to the last connected phone (for example, the paired phone is turned off or it
rejects the connection), the green light will be fl ashing once every 3 seconds indicating it
is powered on but there is no Bluetooth connection.
* For latest compatibility information please visit www.iqua.com
Disconnecting BHS-333 and your phone
Easiest way to disconnect BHS-333 and you phone is simply switch off the BHS-333.
Reconnecting the paired headset to a compatible phone
To reconnect the BHS-333 to the last connected phone, simply switch on the headset
and it will automatically connect to your phone.
Call Functions
Answer a call
When there is an incoming call, you can hear a ringing tone through the headset. Press
the Multifunction -button briefl y to answer the call. You will hear a sound once the call is
answered.
End a call
To end an active call, press shortly the Multifunction -button. You will hear a sound when
the call is ended.
Reject a call
When you receive an incoming call that you do not want to answer, press and hold the
Multifunction -button to reject.
Redial the last dialed number (when supported by the phone)
To place a call to the last dialed number, double press the Multifunction- button when
there is no call in progress. You will hear a high sound when the call is dialed. Please
note some phone models do not support redial.
Voice dialing (when supported by the phone)
To activate the voice dialing feature of your phone, press the Multifunction -button
briefl y when there is no call in progress. You can hear a high sound, which indicates that
you can speak the voice tag. Refer to the mobile phone manual for details. Please note
some phone models do not support voice dialing.
Product specifications
Model BHS-333
Size 48 (L) x 9 (W) x 3 (H) mm
Weight 0g
Talk time Up to 6 hours
Standby time Up to 50 hours
Charging time Within 2 hours
Battery type Rechargeable battery with 2.0 mm jack connector
Bluetooth Standard Bluetooth 2.0 EDR
Supported Bluetooth profi les Handsfree 1.5 and Headset 1.1
Connection Point-to-point
Paired devices Up to 8, one at a time
Operating distance 0 meters
Operating temperature range 0ºC to 50ºC
Reset hardware
To reset the hardware, plug in the power connector. Please notice that pairing
information will not be erased.
Light indication summary
The BHS-333's LED light is green and usually accompanied by a sound signal.
Power on but no Bluetooth connection
Bluetooth connection on
Battery low
Battery charging
Power Management
This product is powered by a built-in rechargeable battery which cannot be changed. Do
not attempt to replace the battery. Rechargeable battery can be charged and discharged
hundreds of times, but it will eventually wear out. After a period of time that will vary
depending on the use and usage conditions, you may fi nd that the built-in battery will
power your product for only a couple of hours requiring you to charge more frequently.
Do charge your device only with the charger provided in the sales package. Unplug the
charger when not in use. Do not leave the device connected to the charger for longer
period than needed, since overcharging may shorten the battery lifetime.
If left unused a fully charged battery will discharge itself over time.
Temperature extremes may affect the ability of the battery to charge. Always try to keep
the device between 5 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold
places, such as in closed car in summer or winter conditions will reduce the capacity
and lifetime of the battery. A device with hot or cold battery may not work for a while
even when the battery is fully charged. Battery performance is particularly limited in
temperatures well below freezing. Do not charge in humid environment.
Care and Maintenance
– Do not expose the device to liquid, moisture or humidity as it is not
waterproof.
– Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
– Do not store the device in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
– Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
– Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fi ne mechanics.
– Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the device.
– Use a soft, clean, dry cloth to clean any lenses.
– Do not expose your device to contact with sharp objects as this will cause
scratches and damage.
– Do not stick anything inside the device as this may damage internal
components.
– Do not dismantle the device or the charger as they do not contain
serviceable parts and taking apart the device may expose you to dangerous
voltages or other hazards.
Act according to your local rules and do not dispose of this product as part of your
normal household waste. Follow the applicable separate collection system for electrical
and electronic products.
How to get service for my IQUA Product?
If you believe that you are entitled to a repair or replacement of your IQUA Product
based on your statutory rights under the applicable national laws relating to the sale of
consumer products or warranty given by the retailer, who has sold the IQUA Product to
you, please contact your retailer.

DECLARATION OF CONFORMITY

We, Iqua Ltd., declare under our sole responsibility, that the product, BHS-333,
conforms with the provisions of the following Council Directive: 999/5/EC. A copy of
the Declaration of Conformity can be found at http://www.iqua.com/declaration_of_
conformity.
Copyright © 2008 Iqua Ltd
3
Green light fl ashes once every 3 seconds
Green light fl ashes twice every 5 seconds
Green light fl ashes twice every 3 seconds,
and a low sound is played
Green light is on continuously
EN