Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MBB Diag III
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
Configure beep volume
Allows you to set the beep volume
Important notes
When plugging MBB Diag III to the vehicle, pay attention to MBB Diag III input
polarity (red clamp to battery positive and black clamp to battery negative), in
cases external power input is needed.
MBB Diag III works with electric tension from the battery.
When a communication error appears, check if the ignition is turned on and if
there aren´t any problems in the contacts between the vehicle´s Diagnosis
connectors and MBB Diag III. Turn off ignition and turn it on again after a few
seconds.
In some vehicles the Diagnosis connector might appear inverted, causing
communication error.
Technical specifications
Input power: 10 to 30 VDC
Current consumption: 500 mA
LCD color screen: 5,7'' 320x240 pixels
Temperature of use: 5 to 40 °C
Weight (without cables and accessories): 950 g
Weight (with suitcase and accessories): 4,8 kg
Dimensions (LxWxH): 285x173x65
108
Publicidad
Tabla de contenido
