Procedures Required Before Using This Equipament; Install Mbb Diag Pc; Upgrading Your Software And Enabling Makers - Mercedes-Benz MBB Diag III Manual De Instrucciones

MBB Diag III
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br

Procedures required before using this equipament

Before start using MBB Diag III, it will be necessary to install the program MBB
Diag PC, to enable carmakers acquired along with the equipment and then
update the program MBB Diag PC.
To enable automakers you will need to use a computer connected to the Internet.
Please, follow the procedure below before using your equipment.

Install MBB Diag PC

The MBB Diag PC installation program can be found on the Tecnomotor site.
Run the program MBB Diag PC and follow the installation procedure.

Upgrading your software and enabling makers

Connect the MBB Diag III to an external power supply that came with the
equipment.
Connect the MBB Diag III to a computer using the USB cable that came with the
equipment, as shown below.
87