4. INSTALLATION
4 ASSEMBLY OF THE VERTICAL PUMP UNIT WITH COMBUSTION ENGINE BY BELT
The vertical pump units with pulley command can be connected to a diesel
engine by flat or trapezoidal belt transmission (Fig.34).
WARNING!
Before installing the belt transmission make sure it has suitable require-
ments as regards power, length and safety devices. Also make sure that
the transmission has the required protection. Also make sure that when
moving the transmission is not in contact with the motor or unit parts.
DO NOT USE THE MACHINE WITHOUT PROTECTION DEVICES OR WITH PRO-
TECTION DEVICES DISABLED
WINDING HAZARD!
Do not approach the action area of the transmission.
Do not wear loose lab coats or clothing with grips that can get hooked on
the transmission. Contact may cause serious accidents.
24