a. Remove the adhesive tape that secures the LVDS cable on the system board [1].
b. Lift the latch with a plastic scribe on the system board.
c. Disconnect the connector of LVDS cable from the slot by a plastic scribe [2] and remove the cable [3].
d. Remove the adhesive tape that secures the Function Key cable on the system board [4].
e. Lift the latch by a plastic scribe and release the Touch cable connected to the system board [5].
NOTE:
Disconnect only the display cable from the system board. NEVER disconnect the display cable from the display
panel.
11. Remove the display assembly from the tablet.
18
Extracción e instalación de componentes