Ensamblaje Del Botón De Encendido; Removing Power Button Assembly - Dell Latitude 12 Manual Del Propietário

a. Display assembly
b. Battery
6. Follow the procedure in
Ensamblaje del botón de encendido

Removing power button assembly

1. Follow the procedure in
2. Remove the:
a. Battery
b. Display assembly
3. To remove the power button assembly:
a. Place the back side of system on a flat surface.
b. Locate the power button assembly.
c. Lift the latch by an angle 35° to unlock and gently release the power button assembly cable [1].
d. Remove the screw (1) that secures the power button assembly to the system board [2].
NOTE: DO NOT try to remove the power assembly without removing the screw.
e. Push with plastic scribe, and pull the power button bracket [3].
After working inside your
Before working inside your
computer.
computer.
Extracción e instalación de componentes 25