Lápiz; Removing Stylus; Instalación Del Lápiz Digital - Dell Latitude 12 Manual Del Propietário

NOTE: DO NOT tighten the screws too much, to avoid damage the screws thread.
10. Install the:
a. Battery
11. Follow the procedure in
Lápiz

Removing stylus

1. Follow the procedure in
2. Locate the stylus at the top of the tablet.
3. Pull the stylus by the thread upward.
NOTE: Avoid pulling the stylus attached with the stretchable thread.
4. Pull the stylus from the groove on the tablet.
NOTE: Pull the stylus until the tip of the pen is visible at the mouth of the groove.
The stylus is ready to assist you in using the rugged tablet.
For more details, see
Instalación del lápiz digital
1. Alinee el lápiz digital con la ranura de la tableta.
2. Presione y deslice con suavidad para asegurar el lápiz digital.
20 Extracción e instalación de componentes
After working inside your
Before working inside your
Getting the stylus ready for use
computer.
computer.