Installing Smartcard Holder; Bottom Base Assembly; Removing Bottom Base Assembly - Dell Latitude 12 Manual Del Propietário

Installing smartcard holder

1. Align the smartcard holder in the tablet chassis.
2. Align and press the copper shield to secure the smart card holder.
3. Replace the screws (10) to secure the smartcard.
4. Install the:
a. Display assembly
b. System board
c. Battery
5. Follow the procedure in

Bottom base assembly

Removing bottom base assembly

1. Follow the procedure in
2. Remove the:
a. Battery
b. Display assembly
c. Heat sink
d. System fan
e. WLAN
f. WWAN
g. System board
h. Back camera
3. To remove the bottom base assembly:
a. Remove the following components of the bottom base assembly:
50 Extracción e instalación de componentes
After working inside your
Before working inside your
computer.
computer.