Comfort Adjustments; Seat Adjustments - Pride Mid-size Serie Manual Del Usuario

V . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT (See figure 14)
WARNING! Remove the key from the key
switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat
while the scooter is in motion.
WARNING! Prior to operating the scooter,
push and pull on the tiller to ensure that the
angle adjustment mechanism is secure.
Inspect the tiller adjustment knob and the
angle adjustment mechanism to ensure that
they are fully engaged. If there is movement
in the tiller, check to make sure that the tiller
adjustment knob is fully tightened.
NOTE: In order to fully lower the tiller for purposes of
disassembly or transport, you must first completely remove
the seat. See VI. "Disassembly and Assembly."
MIRROR POSITION
To install the mirror (see figure 1, 2 or 3):
1. Determine on which side to install the mirror and remove
the rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into the open-
ing and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the mirror
in place.
To adjust the mirror:
1. Position yourself in a seated driving position facing
forward.
2. Adjust the mirror left, right, up or down until you have a
good line of sight behind you.

SEAT ADJUSTMENTS

NOTE: The seating adjustments explained in this section
depend on the type of seat on your scooter. Please refer to
the Scooter Features Table to determine which options
apply to your specific seat type.
Armrest Width Adjustment
Your seat type may be equipped with an armrest width
adjustment feature. The seat arms can be adjusted inward or
outward.
1. Loosen the armrest adjustment knobs. See figure 15.
2. Use the attached ring to pull and remove the detent pins.
3. Slide the armrests in or out to the desired width.
4. Align the adjustment holes on the seat frame and armrest,
then reinsert the detent pin.
5. Tighten the armrest adjustment knobs.
26
or
Figure 14. Tiller Adjustment Knob - Two
Variations
IDENTIFICATION KEY
1. ARMREST ADJUSTMENT KNOBS
2. DETENT PINS
3. SEAT ROTATION LEVER
2
Figure 15. Seat Adjustments – Style A
Mid-size Scooter Series
3
1