Pride Mid-size Serie Manual Del Usuario página 31

V . C O M F O R T A D J U S T M E N T S
Metal tab style positioning belt
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you
hear a "click." See figure 20.
2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
Reusable hook and loop fastener style positioning belt
To adjust the positioning belt for operator comfort:
1. Align the two sides of the belt placing the looped-end side directly above the coarser side ("hook") of
the opposite belt. Press firmly together to fasten. See figure 20.
To release the positioning belt:
1. Grasp the looped-end side of the belt and pull up to detach from the other side of the belt.
MANDATORY! Make sure the positioning belt is properly secured to the scooter and is
adjusted for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose parts or damage, including tears,
worn spots, bent hardware, or damaged latch mechanisms, dirt or debris, before each
use of the scooter. If you discover a problem, contact your authorized dealer for
maintenance and repair.
Mid-size Scooter Series
31