Pride Mid-size Serie Manual Del Usuario página 29

V . C O M F O R T A D J U S T M E N T S
Seat Height Adjustment—Comfort Seat Post
(If Equipped)
To reposition the seat to one of two different
heights:
1. Remove the seat from your scooter. Push
forward or pull upward and hold the seat
rotation lever to disengage the seat, then rotate
the seat and lift it off of the scooter.
2. Remove the rear shroud.
3. Push up the seat post boot to uncover the
hardware.
4. Push down on the seat post while loosening
and removing the shoulder bolt, washer, and
nut. See figure 18.
5. Remove the comfort spring.
6. To raise the seat to the top most mounting hole,
insert the height adjustment spacer. To lower
the seat to the lowest mounting hole, remove
the height adjustment spacer.
7. Reinstall the comfort spring.
8. Hold the upper seat post at the desired height
and match up the locating holes in the lower
seat post. Utilize the top holes for the upper
position or the bottom holes for the lower posi-
tion.
NOTE: When the seat post is mounted in the
upper position, you must utilize two spacers.
9. Press down on the seat post while reinstalling
the hardware and tightening to 210 in • lb (24
N • m).
10. Replace the rear shroud and the seat.
Seat Suspension Adjustment (If Available)
You can loosen or stiffen the seat suspension based on which comfort spring you install.
To adjust the seat suspension:
1. Remove the seat from your scooter. Push forward or pull upward and hold the seat rotation lever to
disengage the seat, then rotate the seat and lift it off of the scooter.
2. Remove the rear shroud.
3. Push up the seat post boot to uncover the hardware.
4. Push down on the seat post while loosening and removing the hex head bolt and nut.
5. Remove the current spring.
6. Install the desired spring. See figure 18.
7. Press down on the seat post while reinstalling the hardware and tightening to 210 in • lb (24 N • m).
8. Replace the rear shroud and the seat.
Mid-size Scooter Series
IDENTIFICATION KEY
1. BOOT
2. UPPER SEAT POST
3. COMFORT SPRING
weight capacities: 0-220 lbs. (0-90.72 kg)
220-400 lbs. (90.72-181.44 kg)
4. SPACER
5. SHOULDER BOLT (210 in • lb [24 N • m])
6. LOWER SEAT POST
7. WASHER
8. NUT
1
2
3
4
5
6
Figure 18. Seat Height Adjustment - Comfort Seat Post
8
7
29