Pride Mid-size Serie Manual Del Usuario página 27

V . C O M F O R T A D J U S T M E N T S
NOTE: Pivot the armrests upward to aid in getting onto
and off of your scooter.
Seat Rotation Adjustment
The seat rotation lever will secure the seat into several
positions.
1. Depending on your seat type, either pull upward or
push forward on the seat rotation lever to disengage the
seat. See figure 15 or 16.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
Seatback Adjustment
WARNING! Do not operate your scooter
with the seatback in a reclined position.
WARNING! Always keep your back pressed
firmly against the seatback while adjusting
the angle.
If you scooter is equipped with a reclining seatback, you
can adjust the seatback angle with the seatback adjustment
lever. See figure 16.
1. With your back pressed up against the seatback, lift up
on the seatback adjustment lever and lean forward or
rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat is
in a comfortable riding position.
Front-to-back Seat Adjustment
If your scooter is equipped with an adjustable seat, you can
reposition the seat forward or rearward to adjust the dis-
tance between the seat and the tiller.
1. Move the seat sliding lever (located at the lower left
side of the seat) outward. See figure 16.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
Mid-size Scooter Series
IDENTIFICATION KEY
1. SEATBACK ADJUSTMENT LEVER
2. SEAT ROTATION LEVER
3. ARMREST ANGLE ADJUSTMENT DIAL
4. SEAT SLIDING LEVER
5. ACCESSORY BRACKET
6. DETENT PIN
5
3
4
Figure 16. Seat Adjustments – Style B
6
1
2
27