Tk01 Models; E-Scrambler Accessories - Ducati MIG Guía De Uso Y Mantenimiento

TK01 models

A - 20.5 Nm B - 10 ÷ 12 Nm
C - 10 Nm D - 8 Nm
E - 1.3 ÷ 1.5 Nm F – 2.5 ÷ 3 Nm
G - 5.5 Nm H – 1 ÷ 1.3 Nm
Stem - 5Nm
Seat-tube - 8Nm Rails under saddle - 12Nm
Elements fixed to the handlebar (grips, display...) - 3Nm
Wheel- refer to the torque on the par+
51

E-Scrambler Accessories

LIGHTS: The E-Scrambler is equipment with both front and rear lights.
The lights are powered by the ebike's bat+ery and can be switched on and
ofe from the display.
REAR RACK: The E-Scrambler's rear rack can carry maximum 25 Kg (55
lbs). The rear rack is only dedicated to carry the goods within the indicated
cargo weight limits. Installation of additional components or accessories
for the transpor+ of persons is not allowed. Any structural modification
that afeects its regular use is prohibited. The carried goods can influence
the riding ability and may afeect the ebike's handling by altering its weight
and balance.
KICK-STAND: The kick-stand's height can be adjusted. Make sure to lif+ it
up before riding.
FENDERS: The E-Scrambler is equipped with alloy front and rear fenders.
Any structural modification that afeects their regular use is prohibited.
Mounting the front fender: before mounting the front wheel, tighten the
two threaded suppor+s into the appropriate holes on the fork. Align the
upper loop clip of the mudguard with the hole in the center of the arch
and lock it in place with the Allen screw. Inser+ the two brackets in the
appropriate caps then screw them to the suppor+s on the fork.
52