Baume & Mercier Clifton Serie Manual De Instrucciones página 12

Setting the date
4. Reset the crown to Position 2.
5. Turn the crown so as to move the date (E) chronologically
forward to one day before the desired date.
Setting the time
6. Pull the crown to Position 3.
7. Turn the crown clockwise to advance the hands (A, B)
8. Continue turning the crown until the desired day (K),
date (E) and time (A, B) are displayed.
For months with less than 31 days, the date must be changed
manually at the end of the month.
WORLDTIMER
16
To adjust your watch, please ensure it is fully wound and
then respect the following steps in this specific order :
Setting the 24 time-zone disc, local time and date
1. Pull the crown to Position 3, the seconds hand (C) will
stop moving.
2. Turn the crown either in one direction or the other so as to
rotate the hands (A, B), and the 24 time-zone disc (O). Index
the time indicated on this disc to the local reference city
(example: if it is 2 p.m. in London, put the 2 p.m. by London).
3. Position the minutes hand (B) on the desired minute.
4. When the start of the set time is announced (reference
8 |
clock, radio, etc.), reset the crown Position 1: the seconds
hand starts again.
5. Pull the crown to Position 2.
6. Turn the crown in order to advance or reverse the hour
hand (A) by jumping an hour until the required date is
indicated (E).
Note: When the hour hand (A) passes 12, if the date changes,
it is midnight, and if the date does not change, it is noon.
7. Position the hour hand (A) to the current time in the city
where you are (local time).
8. Push the crown in again Position 1.
Changing the date
For months with fewer than 31 days, it is necessary to
change the date manually at the end of the month.
1. Pull the crown to Position 2.
2. Turn the crown in either one direction or the other to
advance or reverse the hour hand (A) by jumping an hour
until the required date is indicated (E).
Note: When the hour hand (A) passes 12, if the date changes,
it is midnight, and if the date does not change, it is noon.
3. Position the hour hand (A) to the local time.
4. Press the crown Position 1.
Setting the time depending on where one is
(local time)
If traveling to a different time zone, the hour hand must
be set.
1. Pull the crown to Position 2.
2. Turn the crown to advance or reverse the hour hand (A)
by jumping an hour and position to the desired time.
3. Press the crown Position 1.
ANNUAL CALENDAR
17
Wa rn i ng: To prevent damage to the movement , it is
extremely important that you do not adjust your rapid date
setting between 8 p.m. and 2 a.m.; this is when the movement
pinions are working to automatically change the date.
To adjust your watch, please ensure it is fully wound and
then respect the following steps in this specific order:
Setting the time
1. Set the crown to Position 3, which will stop the seconds
hand (C).
2. Turn the crown clockwise to advance the hands (A, B)
until they are positioned at the desired time.
Note : When the hands pass the numeral 12, if the date
changes, it means it is midnight, and if the date does not
change, it means it is noon.
3. When the start of the set time is announced (reference
clock, radio, etc.), reset the crown to Position 1.
Rapid date and month correction
1. Set the crown in Position 2.
2. Tu r n it to adva n c e t h e d at e ( E) a nd m o nt h (M )
chronologically, until the desired month is displayed,
then the desired date.
3. Reset the crown Position 1.
Note: The annual calendar on your watch is able to keep
track of 30 day months; the month of February is treated as
a 30-day month. At the end of February, you must adjust the
date setting manually using the rapid date change function.
COMPLETE CALENDAR WITH MOON PHASE
18
Warning: To avoid the risk of jamming the corrector buttons
or damaging the movement, it is essential you not make any
adjustment (day, date, month and moon phase) between 3
p.m. and 1 a.m.
To manipulate the corrector buttons, use the small tool
provided in the watch packaging.
To adjust your watch, please ensure it is fully wound and
then respect the following steps in this specific order:
Initial pre-setting stage
1. Pull the crown to Position 2, the seconds hand (C) will
stop moving.
2. Turn the crown to advance the hands (A, B) clockwise
until the date (E) and day (K) change (when the watch
indicates midnight).
3. Continue to turn the crown to set the hands to 3 a.m.
| 9