Storm Alarm On/ Off Setting; Wind Direction Display Type Setting - Technoline WS 2816 Manual De Instrucciones

 The sensitivity value and tendency arrows will start flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to select the value.
 Press the SET key to confirm and to enter the STORM ALARM ON/OFF
SETTING.

STORM ALARM ON/ OFF SETTING

Switch the Storm Warning Alarm On or Off (Default OFF).
 The digit "AOFF" will start flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to switch On or Off the
alarm. ("AOFF" = Off; "AON" = On)
 Press the SET key to confirm and to enter the WIND DIRECTION DISPLAY
TYPE SETTING.
Note: If a storm warning alarm is activated, the downward weather tendency arrow
will be flashing. (See WEATHER TENDENCY INDICATOR below).

WIND DIRECTION DISPLAY TYPE SETTING

The wind direction can be displayed using either compass directions or degree
measurements (default setting is compass directions).
 The wind direction will start flashing.
 Press the ▲UP ARROW key or ▼DOWN ARROW key to toggle from compass
directions to degree measurements.
 If you do not wish to reset the display to factory defaults, simply press the
ALARM or MIN/MAX key, or wait until the SET mode times out and returns to
the normal display mode.
52