Fossil TY2723 Manual Del Usuario página 4

Multifunction VX3R / VX3RE
Time Setting
1 . Pull crown out to position 2 .
2 . Turn crown clockwise to set time .
3 . Return crown to position 1 .
NOTE: 24-hour hand moves correspondingly with the hour and
minute hands. When setting the time be sure to check that the 24-hour hand is set properly.
Date Setting
1 . Pull crown out to position 3 . Turn crown counterclockwise to set date .
2 . Return crown to position 1 .
Three Eye VX3J
(1 crown)
Date Setting
1 . Pull crown out to position 2 .
2 . Turn clockwise to advance the date hand .
3 . Push crown back to position 1 .
Day and Time Setting
1 . Pull crown out to position 3 .
2 . Turn clockwise to advance hour and minute hands . The hand showing days of the week will also move
with the hour and minute hands. Keep turning until you have reached the desired day.
24-Hour Sub-Dial Setting
The 24-hour hand moves correspondingly with the hour and minute hands . When setting the time be sure
to check that the 24-hour hand is set properly .
4
24-HOUR
DATE
DAY
DATE
24-HOUR
Chronograph Stopwatch VD54 (with date - VD53)
(1 crown/2 pushers)
MiNUTE HAND
SECOND HAND
Time and Date Setting
1 . Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position .
2 . Pull crown out to position 2 .
3 . Turn crown clockwise until the previous day's date is displayed .
4 . Pull crown out to position 3 when the second hand is at the 12:00 position .
5 . Turn crown to set time .
NOTE: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be
sure to check that the 24-hour hand is set properly.
6 . Return crown to position 1 .
NOTE: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands
will move.
Chronograph
1 . Press A to start/stop the chronograph .
2 . Press B to reset to zero .
Split Time
1 . Press B while the chronograph is running .
2 . Press B again to return to the chronograph .
3 . Press A to finalize timing .
4 . Press B to reset .
Chronograph Zero Reset
1 . If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3 .
2 . Press A to move hands clockwise; press B to move hands counter-clockwise .
3 . Return crown to position 1 .
A
24-HOUR HAND
B
5