Fossil TY2723 Manual Del Usuario página 9

Digital MLG-017
Normal Time Display
1 . Press A to change mode . Mode sequence
is normal time, alarm, time zone 2, timer,
and chronograph .
2 . Press B for EL .
NOTE: At any point in any setting mode,
press D to exit setting mode.
NOTE: In any setting mode, if no pusher is
operated for 2 minutes, all changes will be saved and the setting will automatically return to display mode.
Time and Calendar Setting
1 . In normal time display, press D; seconds will begin flashing .
2 . Press C to set seconds to zero .
3 . Press A to advance to hour .
4 . Press C to advance digit, press and hold C for fast advance .
5 . Press A to set and advance to next setting value .
6 . Setting sequence is: seconds, hour, minute, year, month, and date .
7 . Press D to exit setting mode .
NOTE: Weekday is automatically updated upon exiting setting mode.
NOTE: At any point in time/calendar setting mode, press B to toggle 12/24 hour format.
Alarm Mode
1 . Press A to change to alarm mode .
2 . Press B to toggle alarm/chime on/off .
Alarm Setting
1 . Press A to change to alarm mode .
2 . Press D to enter setting mode; hour will begin flashing .
3 . Press C to advance digit; press and hold C for fast advance .
4 . Press A to set and advance to next setting value .
5 . Setting sequence is: hour, minutes, month, date . For daily alarm, leave month and date set at "----" .
6 . Press D to exit setting mode .
14
B
A
Time Zone 2
1 . Press A to change to time zone 2 .
C
NOTE: In time zone 2 display, normal time is shown in the lower portion of the display.
2 . Press D to enter setting mode; hour will begin flashing .
3 . Press C to advance digit, press and hold C for fast advance .
4 . Press A to set and advance to minutes .
5 . Press C to advance digit, press and hold C for fast advance .
6 . Press D to exit setting mode .
D
NOTE: At any point in time zone 2 setting mode, press B to toggle 12/24 hour format.
Countdown Timer
1 . Press A to change to timer mode .
2 . Press C to start/stop the timer .
3 . Press B to clear the countdown and reset the timer .
Timer Setting
1 . Press D to enter setting mode; hour will begin flashing .
2 . Press C to advance digit; press and hold C for fast advance .
3 . Press A to set and advance to next setting value .
4 . Setting sequence is: hour, minutes, seconds .
5 . Press D to exit setting mode .
NOTE: At any point in setting mode, press B to toggle auto reset on/off. When auto reset is on, timer will
automatically re-start upon reaching zero.
Chronograph Mode
1 . Press A to change to chronograph mode .
2 . Press C to start/stop the chronograph .
3 . Press B to reset to zero .
Split Time
1 . Press B while the chronograph is running for split time .
2 . Press B again to return to chronograph .
3 . Press C to finalize timing .
4 . Press B to reset to zero .
15