Publicidad
Idiomas disponibles
Idiomas disponibles
Ana-Digi FL1331A
Normal Time Display
1 . Press A or B for EL .
2 . Press and hold A or B for 2 seconds to turn digital display off . Press any
pusher to turn on the display when it is off .
3 . Press C to toggle 12/24-hour format . Display will show "AM" or "PM" for
12-hour format .
4 . Press D to change mode . Mode sequence is time, date, chronograph, alarm .
NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will be saved and the
setting will automatically return to display mode.
Time And Calendar Setting
1 . In normal time display or calendar display, press and hold C for 2 seconds, year will begin flashing .
2 . Press D to advance digits; press and hold D for fast advance .
3 . Press C to advance to next setting value .
4 . Setting sequence is: year, month, date, hour, minute, seconds .
5 . Press C to exit setting mode .
NOTE: Weekday will automatically update upon exiting setting mode.
Chronograph Mode
1 . Press D to change to chronograph mode .
2 . Press D and hold 2 seconds to reset chronograph to zero .
3 . Press C to start/stop the chronograph .
4 . Press D to reset to zero .
Alarm Mode
1 . Press D to change to alarm mode .
2 . Press C to toggle alarm/chime on/off .
3 . Alarm will sound at preset time for 20 seconds; press any pusher to silence alarm .
Alarm Setting
1 . In alarm mode, press and hold C for 3 seconds; hour will begin flashing .
2 . Press D to advance digit; press and hold D for fast advance .
3 . Press C to set and advance to minute .
4 . Press D to advance digit; press and hold D for fast advance .
5 . Press C to exit setting mode .
12
10 Half Digit Digital FL145, FL186
B
C
Normal Time Display
1 . Press A to change mode .
2 . Press B for EL .
3 . Press C to toggle 12/24 hour format .
A
D
4 . Press D to stop alarm sound .
Time/Calendar Setting
1 . From normal time display, press A three times to enter setting mode . Seconds will begin flashing .
2 . Press C to reset seconds to zero .
3 . Press D to set and advance to next setting value .
4 . Press C to increase digit; press and hold C for fast advance . Press D to set each setting value .
5 . Setting sequence is: seconds, hour, minutes, month, date, day of week .
6 . Press A to exit setting mode .
Alarm Setting
1 . Press A to change to alarm mode (AL) .
2 . Press and hold C for alarm sound testing .
3 . Press C to toggle alarm/chime on/off .
4 . Press D to enter setting mode; hour will begin flashing .
5 . Press C to advance digit; press and hold C for fast advance .
6 . Press D to set hour and minutes .
7 . Setting will automatically exit setting mode mode after minutes are set .
Chronograph Mode
1 . Press A to change to chronograph mode (ST) .
2 . Press C to start/stop chronograph .
3 . Press D to reset chronograph when it is not running .
Split Time
1 . Press D while the chronograph is running .
2 . Press D again to return to the chronograph .
3 . Press C to finalize timing .
4 . Press D to reset to zero .
B
C
A
D
13
Publicidad
