Publicidad
17
R
TWIST-LOCK
FASTENER (T)
- Position the INNER END (B) as shown.
NOTE:
Notice the location of the two holes in the middle of the INNER END.
- Push a SAUDER TWIST-LOCK
not push TWIST-LOCK
R
NOTE:
Be sure the TWIST-LOCK
diagrams. Make sure the point is positioned as shown in the enlarged diagram. Do not
tighten the TWIST-LOCK
NOTE:
If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
RETURN KITS ON LEFT
Hole
INNER
END (B)
R
FASTENER (T) into the indicated large holes shown in the INNER END (B). Do
FASTENERS into the other two large holes in the INNER END.
R
FASTENERS are positioned exactly as shown in the enlarged
R
FASTENERS at this time.
R
www.sauder.com/services
Dowel end
Hole
FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.
Do not insert
R
TWIST-LOCK
FASTENERS into
these two holes in
the INNER END.
109872
Publicidad
