Publicidad
25
See the 109848
instruction book
for the Return Kit
weight limits.
THIS SAUDER UNIT HAS BEEN
DESIGNED FOR THE WEIGHTS
SHOWN IN THIS STEP. EXCEEDING
THESE RECOMMENDED WEIGHTS
COULD RESULT IN EXCESSIVE
"SAGGING" OF THE SHELF.
EXTREME OVERLOADING COULD
CAUSE FAILURE OF THE SHELF
AND POSSIBLE INJURY.
- Insert the drawers, keyboard shelf, and sliding shelf into the 109843 Executive Desk and 109848 Return Kit. You may
refer to step 20 of the 109843 instruction book.
NOTE:
You have the option of attaching the keyboard shelf from either the 109843 or 109848 to
the 109872.
- Insert the GROMMET (P) into the large hole in the TOP (E). Then, insert the GROMMET CAP (Q) into
the GROMMET.
- Insert HOLE PLUGS (W) into any visible unused holes in any one of the units.
- When moving the units, we recommend you separate the units from each other, move them to the new destination, and
then attach.
This completes assembly. Use your favorite type of furniture polish on all finished surfaces to enhance the beauty of the finish.
Do not spray the polish directly onto the furniture. Spray the polish onto a cloth, then use the cloth to wipe the surface.
TOP (E)
Keyboard Shelf
and Sliding Shelf
Small
drawers
Large
drawers
www.sauder.com/services
GROMMET
CAP (Q)
GROMMET (P)
100 lbs.
40 lbs.
See the 109843
instruction book
for the Executive
Desk weight limits.
109872
Publicidad
