Publicidad
3
Do not insert TWIST-LOCK
into the INNER END (B) in this step.
IMPORTANT:
Do NOT insert TWIST-LOCK
- Push a SAUDER TWIST-LOCK
this step for the RIGHT UPRIGHT (C), LEFT UPRIGHT (D), MODESTY PANEL (F), and SHELF (G).
NOTE:
Be sure the TWIST-LOCK
diagrams. Make sure the point is positioned as shown in the enlarged diagram. Do not
tighten the TWIST-LOCK
NOTE:
If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
109872
IMPORTANT:
R
FASTENERS
R
TWIST-LOCK
FASTENER (T)
R
FASTENER (T) into each large hole in the OUTER END (A) as shown. Repeat
R
FASTENERS are positioned exactly as shown in the enlarged
R
FASTENERS at this time.
www.sauder.com/services
OUTER
END (A)
R
FASTENERS into the INNER END (B) in this step.
R
FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.
Dowel end
Publicidad
