Ivoclar Vivadent bluephase C8 Manual Del Usuario página 4

HIGH POWER Program
Consistently high light intensity for the poly-
merization of restorative and cementation ma-
terials for direct and indirect restorations.
800 mW/cm 2
0 t [s]
LOW POWER Program
Reduced light intensity with reduced heat de-
velopment for the polymerization of adhesives,
liners, and restorative materials in areas near
the pulp when restoring Class V cavities.
650 mW/cm 2
0 t [s]
SOFT START Program
Step-by-step increase of the light intensity
with reduced shrinkage stress and reduced
heat development for the polymerization of
restorative materials.
800 mW/cm 2
650 mW/cm 2
0 5 t [s]
1) Applies to a maximum layer thickness of 2 mm and provided that the Instructions for Use of the respective material do not state any other recommendation (might be the case
with dentin shades) 2) Applies to a maximum layer thickness of 3 mm
5
bluephase
Light intensity 800 mW/cm 2 ± 10%
Max. exposure time for composites 20 sec.
Max. exposure time for Tetric EvoCeram 15 sec.
Filling materials Curing time
Composite
Tetric EvoCeram / Tetric EvoFlow 15 sec.
IPS Empress Direct
Artemis / 4 Seasons, InTen-S,
Tetric new, Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow 20 sec.
Others 1)
Compomer 2)
Compoglass F / Compoglass Flow 40 sec.
Indirect restorations /
Luting materials
Variolink II 3) , Variolink Veneer 3) per mm ceramic: 10 sec. per segment
Variolink Ultra 4) , Multilink Automix 4) , 10 sec. per segment
Dual Cement 4)
Miscellaneous
Helioseal / Helioseal F / Helioseal Clear 20 sec.
Monopaque 30 sec.
MultiCore Flow / Multicore HB 40 sec.
CoroSeal 20 sec.
CoroSeal Bonding 10 sec.
Vivaglass Liner 20 sec.
Adhesive
AdheSE , AdheSE One, AdheSE One F 10 sec.
ExciTE, ExciTE DSC
Tetric N-Bond
Syntac / Heliobond
Temporary materials
Systemp.link 10 sec.
Systemp.inlay/onlay 10 sec.
Fermit / Fermit N 10 sec.
Miscellaneous
Heliosit Orthodontic 20 sec.
Filling materials
Composite
Tetric EvoCeram / Tetric EvoFlow 20 sec.
IPS Empress Direct
Artemis / 4 Seasons, InTen-S,
Tetric new, Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow 25 sec.
Others 1)
Compomer 2)
Compoglass F / Compoglass Flow 25 sec.
3) Applies to light-curing (exclusive use of base paste) 4) Applies to dual-curing
® C8
6
Dear Customer,
Optimum polymerization is an important
requirement for all light cured materials in
order to consistently produce high quality
restorations. The polymerization light
selected also plays a decisive role in this
respect. Therefore, we would like to thank
you for having purchased bluephase C8.
bluephase C8 is a high-quality medical device
which has been designed according to the
latest standard of science and technology in
compliance with the relevant industry stan-
dards.
These Operating Instructions will help you
safely to start up the device, make full use of
its capabilities and ensure a long service life.
Should you have any further questions,
please do not hesitate to contact us
(see addresses on the back cover).
Your Ivoclar Vivadent Team