Anden AS35FP Instrucciones De Instalación Y Mantenimiento página 22

Step Display Description
Control dead band:
Display shows
Humidify/Dehumidify symbols are also displayed since this value applies to
12
both .
Please select the desired dead band value .
If you have selected dehumidify only at Step 6, go directly to Step 14.
Minimum voltage of humidify modulating output:
Display shows
minimum voltage of the signal
Humidify symbol is also displayed .
13
If you have selected humidify only at Step 6, go directly to Step 15.
Minimum voltage of dehumidify modulating output:
Display shows
minimum voltage of the signal
Dehumidify symbol is also displayed .
14
Select the desired value of the minimum voltage of AO2 output .
Minimum voltage of AO3 output:
Display shows
minimum voltage of the signal
Humidify symbol is also displayed .
15
Select the desired value of the minimum voltage of AO3 output .
If you have selected dehumidify only at Step 6, go directly to Step 17.
Minimum voltage of AO4 output:
Display shows
minimum voltage of the signal
Humidify symbol is also displayed .
16
Select the desired value of the minimum voltage of AO4 output .
22 English
control dead band
and its value .
min vdc analog ao1 output
0.
for 0 to 10 Vdc or
0
min vdc analog ao2 output
0.
for 0 to 10 Vdc or
0
min vdc analog ao3 output
0.
for 0 to 10 Vdc or
0
min vdc analog ao4 output
0.
for 0 to 10 Vdc or
0
Values
Dead band range: 0 . 3 to 5 . 0 %RH
Increment: 0 . 1 %RH
Default setting: 0 . 3 %RH
and the value of the
2.
for 2 to 10 Vdc .
0
Range: 0 . 0 or 2 . 0 Volt
Default setting: 0 . 0 Volt
and the value of the
2.
for 2 to 10 Vdc .
0
Range: 0 . 0 or 2 . 0 Volt
Default setting: 0 . 0 Volt
and the value of the
2.
for 2 to 10 Vdc .
0
Range: 0 . 0 or 2 . 0 Volt
Default setting: 0 . 0 Volt
and the value of the
2.
for 2 to 10 Vdc .
0
Range: 0 . 0 or 2 . 0 Volt
Default setting: 0 . 0 Volt