Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Montaje

Installation Steps

Press (6) hood inserts into the (6) square holes. If
necessary use tape to hold them firmly in place.
3
Using a phillips screwdriver install (6) screws with (6)
washers at the locations noted in Step 3.
square hole
hood
hood insert
hood shield
washer
screw
5
DO NOT OVER TIGHTEN

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Align pre-drilled holes in hood shield with holes in hood. Place
4
Close hood, and install bump ons at pre-cleaned loca-
6
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
hood shield on hood.
tions on the painted hood surface.