To Switch Time Zones; Time Of Day Notes & Tips - Timex ROAD TRAINER Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To Switch Time Zones

The watch can track two time zones (T1 and T2). To look at the second
zone in Time of Day Mode, press START/SPLIT. T1 or T2 will flash in the
lower right corner indicating the alternate time zone. You can switch from
T1 to T2 or T2 to T1 by using these steps:
1. Press and hold START/SPLIT until HOLD FOR T1 or HOLD FOR T2
appears.
2. Continue to hold until the time switches and the watch beeps.
Time of Day Notes & Tips
You can return to Time of Day Mode from any other mode on the
v
watch by pressing MODE until the time of day appears.
The watch does not automatically adjust for Daylight Savings Time.
v
When switching between Standard Time and Daylight Savings Time,
you must manually adjust the hour value.
The watch automatically moves from February 28 to March 1. To
v
accommodate a leap year, you must manually set the date value to
February 29. The watch will then automatically move from February 29
to March 1.
At any time during the setting process, you can save your changes and
v
return to the main time display by pressing STOP/RESET/SET.
14
While setting the watch, if you do not press any buttons on the watch
v
for a period of 2 to 3 minutes, the watch will automatically save
whatever changes you have made and will exit the setting process.
With the watch receiving a signal from the heart rate sensor, you
v
can change the Time of Day Mode display by pressing HEART RATE.
Choose from:
1. Time of Day with Day/Month/Date;
2. Heart Rate over Time of Day;
3. Time of Day over Heart Rate; or
4. Heart Rate only.
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Road trainer m014

Tabla de contenido