To Set The Alarm; Alarm Mode Notes & Tips - Timex ROAD TRAINER Manual Del Usuario

To Set the Alarm

1. Press MODE until ALARM appears.
2. Press HEART RATE to toggle between ALARM 1 and ALARM 2.
3. Press STOP/RESET/SET to enter the setting state with Hours flashing.
4. Press START/SPLIT (+) or HEART RATE (-) to change the value.
NOTE: If your watch is set for 12-hour time format, the AM and PM
indicators will change as you increase or decrease the Hours setting.
5. Press MODE (NEXT) to go to the Minutes field.
6. Press STOP/RESET/SET (DONE) to save your changes and exit the
setting process.
NOTE: To quickly change the value being set, press and hold START/SPLIT
(+) or HEART RATE (-).
30
Alarm Mode Notes & Tips
To turn an alarm ON or OFF without entering the setting state, press
v
START/SPLIT while in Alarm Mode with ALARM 1 or ALARM 2 shown.
If you change any alarm settings, you automatically turn the alarm on.
v
When you set the alarm, the alarm clock icon a appears on the display
v
in Time of Day Mode, as confirmation.
When the alarm sounds, you can silence it by pressing any button on
v
the watch.
If you do not silence the alarm before the alert finishes, a backup
v
alarm will sound after 5 minutes.
31