Assembly Instructions - Harbor Breeze SARATOGA II Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

12. Insert blade assembly through slot on fan motor
assembly (H) and align three screw holes in blade
arm (F) with screw holes in fan motor assembly (H).
Secure with three blade arm screws (BB). Repeat for
remaining blade assemblies.
Hardware Used
Blade Arm Screw x 15 + 1 extra
BB
13. Loosen two preinstalled screws from fan motor
assembly (H). Remove and save remaining
preinstalled screw.
14. Pull the BLUE and WHITE wires from fan motor
assembly (H) through center hole of fitter plate (I).
Align two keyslots on fitter plate (I) with two screws on
black bracket below fan motor assembly (H).
12
Slot
F
BB
13
Screw
14
Black
bracket
I
Keyslots
10
ASSEMBLY INSTRUCTIONS
15. Place the fitter plate (I) over two screws and turn
clockwise until it locks. Install previously removed
screw (Step 13, page 10) and securely tighten all
screws.
H
16. Loosen two preassembled screws from fitter plate (I).
Remove and save remaining preassembled screw.
H
17. Connect BLUE wire from fan motor assembly (H) to
BLACK wire from light fitter assembly (J). Connect
H
WHITE wire from fan motor assembly (H) to WHITE
wire from light fitter assembly (J).
15
I
Screw
16
Screw
17
H
Blue
White
Black
H
EE
11
I
B
J