Saving A Full Configuration Of Parameters In Offline Mode; Opening A Full Configuration Of Parameters In Online Mode - MarelliMotori D-Vo Light Manual Del Usuario

7.7.2. Saving a full configuration of parameters in OFFLINE mode

•
Start D-Vo Dashboard
•
Create a full configuration as described in Paragraph 7.6.
•
Like before, to save the configuration on the PC, in the Menu Area select the File menu, then click
on Save or Save As. As an alternative, click on the Save shortcut.
•
The software shall then display a dialogue window allowing to assign a name to the file and to
select the drive folder in which you wish to save it.

7.7.3. Opening a full configuration of parameters in ONLINE mode

•
Start D-Vo Dashboard
•
Establish the connection with a D-Vo unit.
•
In the Menu Area select the File menu, then click on the Open item. As an alternative, click on the
Open shortcut.
•
The software shall display a dialogue window allowing to search and select a configuration file you
previously saved on the PC drive.
•
Once the configuration file has been selected, D-Vo Dashboard shall ask whether you wish to
proceed with the file loading operation.
NOTE: in ONLINE mode, opening a saved configuration means loading the configuration in question
into the D-Vo Dashboard interface, but not in the D-Vo unit. Perform an Upload to D-Vo to ensure that
the D-Vo unit is updated with the new parameters.
WARNING: before proceeding with the operation, make sure that the loaded configuration is
suitable for the generator controlled by the D-Vo unit, particularly if the operation in question
is performed with the generator running.
9638571A0_C
D-Vo Light – Marelli Motori
EN 56