Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Center part on front edge of hood and align holes.
3
With the fastener assembly inserted into hole in
hood, secure hood shield to hood by tightening
screw to expand well nut. Repeat for remaining
5
NOTE: DO NOT OVER TIGHTEN
Apply bump ons to surface of hood.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
fasteners.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2006 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
NOTE: Observe the alignment from the side view in
order to guide the hood shield with its attached fastener
into the proper hole in the hood.
Hood
Hood
shield
4
6
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
Fastener
assembly
Close Hood.